BPXMT - AMERCOAT POLYAMIDE-CURED EPOXY PROMER, 83A
- MSDS: BPXMT
- Manufacturer: AMERON PROTECTIVE COATINGS
- Product Name: AMERCOAT POLYAMIDE-CURED EPOXY PROMER, 83A
- National Stock Number: 8010-00N034281
Product Identification
Product ID:AMERCOAT POLYAMIDE-CURED EPOXY PROMER, 83A
MSDS Date:12/27/1991
FSC:8010
NIIN:00N034281
MSDS Number: BPXMT
Responsible Party
BREA, CA 92622-1020
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 714-529-1951
Cage: 0Y2E4
Contractor
Telephone: 714-529-1951
Cage: 0Y2E4
Ingredients
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
CAS: 14807-96-6
RTECS: MW2710000
Fraction By Weight: <15%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: <15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
2-PENTANONE, 4-METHYL-; (METHYL ISOBUTYL KETONE) (SARA
CAS: 108-10-1
RTECS: SA9275000
Fraction By Weight: 8.44%
OSHA PEL 100 PPM/75 STEL
ACGIH TLV: 50 PPM/75 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
11.4 G/KG
CAS: 25068-38-6
RTECS: KC2100000
Fraction By Weight: <10%
1.6
CAS: 110-43-0
RTECS: MJ5075000
Fraction By Weight: 8.02%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: <10%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
7.1 @ 68F.
CAS: 100-41-4
RTECS: DA0700000
Fraction By Weight: 4.21%
OSHA PEL 100 PPM; 125 STEL
ACGIH TLV: 100 PPM; 125 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
30 G/KG
CAS: 25036-25-3
Fraction By Weight: <5%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
QUATERNARY AMMONIUM COMPOUNDS, BIS(HYDROGENATED TALLOW
CAS: 68953-58-2
RTECS: UZ2996400
Fraction By Weight: <5%
OSHA PEL 10 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
4.3 G/KG
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 16.85%
OSHA PEL 100 PPM; 150 STEL
ACGIH TLV: 100 PPM; 150 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PHOSPHORIC ACID, ZINC SALT; (ZINC PHOSPHATE)
CAS: 7779-90-0
RTECS: TD0590000
Fraction By Weight: <20%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAP/SPRAY MIST CAN BE HARMFUL.
IRRITATING TO EYES, SKIN, NOSE & THROAT. EXCESSIVE INHAL CAN CAUSE
HDCH, NAUS OR DIZZ. RPTD/PRLNGD OCCUP OVEREXPOS TO SOLV IS ASSOC
W/PERM BRAIN & NERV SYS DAM. CAN BE H ARMFUL/FATAL IF SWALLOWED.
CAN BE HARMFUL IF INHALED/ABSORBED THRU SKIN. OVEREXPOS CAN DAM
CNS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:OVEREXPOSURE OR INGESTION CAN CAUSE
LUNG, KIDNEY &/OR LIVER DAMAGE. OVEREXPOSURE CAN CAUSE SKIN & EYE
BURNS &/OR INJURY. SKIN & RESPIRATORY SENSITIZATION & ALLERGIC
REACTION SUCH AS RASH, HIV ES OR ASTHMA CAN OCCUR. CHEMICAL
PNEUMONIA. ASPIRATION HAZARD.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:IF OVEREXPOSURE TO VAPOR/SPRAY MIST; PROVIDE FRESH AIR.
IF BREATHING LABORED, GIVE O*2/ARTF RESP. SKIN:WASH THORO W/SOAP &
WATER. EYES:FLUSH IMMEDIATELY W/PLENTY OF WATER FOR AT LEAST 15
MINS & GET MD. INGEST:DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DO
NOT INDUCE VOMITING. CONSULT MD OR POISON CONTROL CENTER
IMMEDIATELY. TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:SCC
Flash Point:72.0F,22.2C
Lower Limits:1
Upper Limits:8
Extinguishing Media:FOAM, CO*2 & DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLSD CONTRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. ISOLATE FROM HEAT, ELEC EQUIP, SPARKS & OPEN FLAME.
VAPS MAY SPREAD LONG DISTANCES, CAUSE FLASH (SUP DAT)
Accidental Release
Spill Release Procedures:AVOID BREATHING OF VAPORS. USE ABSORBENT
CLEANUP MATERIAL. PLACE IN SEPARATE CONTAINER. KEEP OUT OF SEWERS &
WATERWAYS. IF ENTRY IS THREATENED OR OCCURS, NOTIFY LOCAL
AUTHORITIES. ELIMINATE ALL SOURCE S OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA. AVOID STORAGE TEMPERATURES ABOVE 100F. KEEP CONTAINER CLOSED,
UPRIGHT WHEN NOT IN USE.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PRLNGD BRTHG OF
VAPORS/SPRAY MIST OR CONTACT W/SKIN & EYES. DESTROY CONTAMD LEATHER
& ABSORB SHOES WHICH CANNOT BE DECONTAMD. DO NOT WELD OR FLAME CUT
AN EMPTY CONTAINER. GROUND CONTAINERS WHEN POURING.
Exposure Controls
Respiratory Protection:NIOSH/MSHA CERTIFIED RESP. FOR SPECIFIC CNDTNS,
REFER TO CURRENT NIOSH POCKET GUIDE TO CHEM HAZ. USE NIOSH/MSHA
APPRVD AIR-LINE RESP IN CONFINED/RESTRICTED VENT AREAS. REFER TO
29CFR, OSHA PARTS 1910 & 1915, FOR COATING OPERATIONS.
Ventilation:SUFFICIENT VENT, IN VOL & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAM CONC BELOW TLV LIMIT. REMOVE WELDING (SUP DAT)
Protective Gloves:NEOPRENE OR OTHER SUITABLE IMP (SUP DAT)
Eye Protection:CHEM WORK GOGGS/FULL LENGTH FSHLD
Other Protective Equipment:FULL PROTECTIVE CLOTHING & SPARK-PROOF
EQUIPMENT. EMERGENCY EYEWASH & DELUGE SHOWER .
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING OR USING
WASHROOM. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EXPLO HAZ:FIRE OR IGNITE EXPLOSIVELY. VENT:OR FLAME CUTTING
DECOMPOSTION PRODUCTS. REFER TO 29 CFR, OSHA PARTS 1910 & 1915, FOR
COATING OPERATIONS. PROT GLOVES:MATERIAL FOR SOLVENTS.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.39-1.63
Evaporation Rate & Reference:LOW:0.40 HIGH:1.60 BUAC=1
Appearance and Odor:LIQUID; SOLVENT ODOR.
Percent Volatiles by Volume:63
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS & ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:BY FIRE, BURNING OR WELDING:CARBON
MONOXIDE & CARBON DIOXIDE, IRON OXIDE FUMES, AMMONIA & ALDEHYDES.
Disposal
Waste Disposal Methods:IN SEPARATE, CLOSED METAL CONTAINER IN
ACCORDANCE W/ALL APPLICABLE REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.